This section contains a most extensive range of over center and motion control cartridges, including normal, part vented and fully vented versions. Suitable for load holding, load safety and to prevent load runaway, giving low pressure drops, various pilot ratios and excellent stability to all types of moving loads.
All of Danfoss motion control valve cartridges are made of hardened and ground steel for maximum durability and reliability.
1CE/1CEE
To control moving loads and Over center cartridge prevent load runaway, giving pilot assisted relief with check load holding and hose failure safety.
1CER
As 1CE series but with relief balanced against back pressure allowing the valve to be used with closed center DCV with service line reliefs.
1CEB/1CEBD
As 1CE series but balanced on relief and pilot areas. For use on proportional systems or applications with widely varying back pressures.
1CEL
This valve is used in systems where the machine framework introduces instability, such as telescopic handlers, cranes and concrete pumps.
1CPB/1CPBD
For use on boom lock applications giving load-holding and hose failure safety. With or without internal relief.
1CEEC
Motion control valves with make up checks and cross line relief function for use on transmission systems or single rod cylinders when dual relief is required.
1CEESH/1CEECSH
As ICEEC series but with added brake shuttle for removal of spring applied park brakes.
1CEBL
These over center valves are suitable for use on the boom and dipper cylinders of an excavator to help the manufacturer or user comply with standard ISO8643.