1CPBD120 Overcenter valve - Zero differential with check

1CPBD120 - Overcenter valve

Zero differential with check 180 L/min (47 USgpm) • 400 bar (5800 psi)

Description

Zero differential overcenter valves give static and dynamic control of loads by supplying a restriction to flow related to the opening of the valve created by the pilot pressure. The valve is used in conjunction with a remote pilot source to provide hose failure protection, load control and load holding functions. If over-pressure or shock pressure protection is required then a separate relief valve should be used The drain line allows the valve to be used in corrosive atmospheres preventing the ingress of atmospheric contaminant.

Operation

The check section allows free flow into the actuator then holds and locks the load against movement. By the application of pilot pressure to the pilot port the poppet moves back against the main spring opening the cylinder port to the valve port. The metering characteristic of Performance data Sectional view Pressure drop the valve is controlled by the rate of the spring, the seat angle and the pilot pressure applied. Due to the balanced poppet design load induced pressure will not open the valve and once open valve port pressure will not increase the pilot pressure required to keep the valve open.

Features

The cartridge fits a simple cavity allowing quick, easy field service reducing down time. Hardened poppet and seat provide for long leak free performance.

Performance Data

• Cavity: x
• Flow Rating: x
• Typical Pressure: x