2200 Series Accessories
Adjustable Lane Guides
- 2200 Belted conveyors only
- UHMW guide surface on an anodized aluminum mounting rail
- Painted Steel mounting hardware
- Available in standard 1′ (305 mm) increments or can be ordered to any length
- Part height: 5” (127 mm) maximum, 0.25” (7 mm) minimum
- 0.25” (6mm) minimum lane width
- Package includes (1) lane guide, mounting hardware and adjusting knobs
- For conveyors up to 24″ (610 mm) wide – Consult factory for wider lane guide availability
- Compatible with standard Dorner bolt-on profiles
- Easily adjusts for quick product change over
- Attach additional guides to create multiple lanes
- Create lanes, plows, merges and transfers
- Order additional lane kits separately
Flared Side Guides
- 2200 Belted conveyors only
- Guides parts onto conveyor belt surface
- Includes metric mounting hardware
90° Adjustable Transfer Guides
- 2200 Belted conveyors only
- For conveyors up to 12” (305 mm) wide
- Requires low side conveyors
- 0.25” (6 mm) minimum part thickness, 0.88” (22 mm) minimum product size
- Hard coat anodized transfer plate
- Painted steel mounting hardware
- 48” (1,219 mm) long UHMW outside turn guide
- Maximum recommended part weight is 20 lbs (9 kg) at 50 ft/min (15 m/min) belt speed. Consult factory regarding applications for
- higher product weights or faster belt speeds.
- 0.88″ (22 mm) minimum product size for 2200 Series
- Package includes outside turn guide, guide wheel, adjustable mounting hardware and extruded aluminum transfer plate.
- Pre-engineered guided turns adjust to a variety of products
- Accepts standard Dorner bolt-on profiles outside of transfer area
- Place adjusting rods where required
- Easily adjusts for quick product change-over
Drive Accessories
Flexible Coupling A
- 12 mm bore x 0.38″ hex
- Includes SAE set screws
Flexible Coupling B
- 12 mm bore x 12 mm bore
- Includes metric set screws
Clear Cover
- Fits 2200 light load top mount and standard and heavy load top and bottom mount packages
Spline Shaft
- Compatible with Precision Move Gang Mid Drive
T-Slot Accessories
Spring T-Nut
- Retains position in T-Slot
T-Bars
- Mounts in T-slots to attach heavy accessories
T-Bolts & T-Nuts
- Mounts in T-slots to attach accessories
- 1/2 turn install and remove
- T-nut requires thread lock screw
T-Slot Dust Cover
- Black plastic extrusion
- Snaps into conveyor and aluminum stand T-slots
- Can be trimmed to fit
T-Slot Extenders
- Provides additional T-slots to the end of the conveyor
- Includes mounting brackets and hardware
- Metric fasteners
Mounting Brackets
Adjustable Height Bracket
- Provides height adjustment
- (2) Height ranges
- Includes mounting hardware
Table Top Mounting Bracket
- Includes metric mounting hardware
Frame Mount Casters
- Compatible with 2200 Belted conveyors only
- Includes metric mounting hardware
- Provides floor to T-Slot height of 4.94″ (125 mm)
Floor Mount Brackets
- Includes metric mounting hardware
- Provides floor to T-Slot height of 4.81″ (122 mm)
End Stops
Adjustable End Stops
- Slides up and down T-slot length
- Includes metric mounting hardware
Fixed End Stops
- Fixed at end of conveyors
- Anodized aluminum stop
- Includes tail plates and mounting hardware
Roller Conveyor End Stop
- For roller stop conveyors
- Includes metric mounting hardware
Pulley Transfer Plates
- 2200 Belted Conveyor Only
- Enables the transfer of product that is a 0.88” (22 mm) minimum.
- 300 series stainless steel transfer plate
Motion Control
In-Line Cord Emergency Stop Kit
- Push to stop/pull to start push button
- Plastic NEMA 12 enclosure
- 115V single phase
- 1/2 hp (0.37 kW) and smaller motors
- Includes power and outlet cords
- Mounting for 2200 and support stands
- Horizontal or vertical mount
Side Tables
- Provides a 6” (152 mm) or 12” (305 mm) wide working surface
- Adjusts in/out and up/down (0.25″ max above bedplate) for product transfer on/off conveyor belts
- Can be positioned anywhere along the conveyor
- Anodized aluminum work surface
- Max load: 5 lbs/ft (6 kg/m), use Adjustable Tie Brackets for added capacity
- Available in 1′ (305 mm) increments from 1′ (305 mm) to 99′ (30,175 mm)