The distributors ZV-B are used for dual-line central lubrication systems for grease and for oil. Their function is to meter the lubricant and to press it through the lines to the lubrication points independently of back pressure.
Product characteristics:
Design
The distributors ZV-B are block type designed, and constructed in different metering volumes. Each distributor has two threaded holes G 3/8 on each if its two faces for the optional connection of the two main lines. For the connection of the friction point lines, the distributor have two to eight threaded holes G 1/4. The distributor do not have springs and work hydraulically, operated by the lubricant.
Function
The distributor ZV-B has one metering piston and one control piston for every two lubrication points, connected. Depending on either main line no. I or main line no. II is pressurized, where the second main line must be relieved of pressure, only that lubrication point will be served which is associated with the main line concerned. As a result, an operating cycle always, includes two lubricating strokes.
Advantages
Technical Data
Working pressure max. | 400 bar |
Actuating pressure min. | 10 bar |
Metering volume | 0.5; 1.0 or 3.0 cm3 |
Actuating volume | 0.3 cm3 |
Number of outlets | 1 to 8 |
Temperature range (distributor with electrical monitoring) | - 20C to + 70C |
Temperature range (distributor without electrical monitoring incl. protection cap) | - 20C to + 120C |
Suitable lubricants on mineral oil basis: | |
Grease lubricants | NLGI class 3 DIN 51818 |
Oil | ISO VG 68 to 1500 (DIN 51519) as service viscosity 190 mm2/s |
Synthetic lubricants | on request |