DD Dualine Valves

DD Valves are completely hydraulic in operation and will deliver either oil or grease. These Dualine valves are also fully and individually adjustable in regard to discharge quantity and are equipped with operational indicators. Each DD valve serves two bearings; however, by a simple method of cross-porting, it will serve one. Therefore, a four valve block, as an example, can actually serve anywhere between four and eight bearings. DD valves can be supplied in several basic discharge capacities and are available in blocks consisting of one, two, three or four valves.

Operation

Pressurized lubricant entering the valve forces the pilot piston down, allowing pressure to be applied to top of the main piston. The main piston begins to move down under pressure, forcing lubricant from its chamber, past the lower land of the pilot piston and out the discharge line to the bearing. When pressure in the supply line is reversed, lubricant then enters valve and forces the pilot piston up, allowing pressure to be applied to bottom of main piston, which begins to move up, forcing lubricant from its chamber, past the upper land of the pilot piston and out the second discharge line to the bearing.

Features

• No springs or check valves
• No small ports
• No system redesign when adding or subtracting points
• Positive indication at every bearing
• Has only two moving parts
• Individually adjustable

VALVE OUTPUT

HOW TO ORDER

* Supply 1/4” tube; discharge 3/16” tube
** Supply 3/8” tube; discharge 1/4” tube
**** Output volume is not adjustable and fixed at maximum