Robeck Fluid Power - SHOP PRODUCTS ONLINE. Danfoss - N5 Series Hydro-Line Industrial Tie Rod Cylinders

Bore Sizes

11/2” through 30”

Pressure Ratings

N5 - 3000 psi hydraulic

AN5, LAN5 - 250 psi air

Temperature

-40°F to 200°F standard

NFPA interchangeable mountings

N5 - Hydraulic cylinders incorporate urethane Ultra-Seal rod seals, carboxylated double lipped rod wipers, cast iron piston rings, honed steel tubing I.D. and SAE ports.

AN5 - Pneumatic cylinders incorporate carboxylated lip-type rod seals, carboxylated double lipped rod wipers, carboxylated piston seals, .0003/.0005” thick chrome plated tube I.D. and NPTF ports.

LAN5 - Pneumatic cylinders incorporate all AN5 features and are also permanently lubricated at assembly by filling the piston and rod seals “V” groove with molybdenum disulfide grease.

Model Code Configurations:

1. Model Series

N5	Hydraulic high pressure
AN5	Air heavy duty
LAN5	Air heavy duty pre-lubricated

2. Mounting Style

A	Side lugs, MS2
B	Side tapped, MS4
C	Cap fixed clevis, MP1
CS	Cap spherical bearing
DC	Cap detachable clevis, MP2
E	Side end lugs, MS7
F	Head rectangular flange, MF1
G	Head rectangular, ME5
H	Center-line lugs, MS3
J	Head square flange, MF5
K	No mount
L	All tie rods extended, MX1
M	Head end tie rods extended, MX3
N	Cap end tie rods extended, MX2
P	Cap rectangular, ME6
R	Cap rectangular flange, MF2
S	Cap square flange, MF6
TT	Intermediate fixed trunnion, MT4
U	Head trunnion, MT1
W	Cap trunnion, MT2

3. Double Rod

D	Include ONLY for double-rod cylinder

4. Bore Size

1.50	1-1/2" bore
2.00	2" bore
2.50	2-1/2" bore
3.25	3-1/4" bore
4.00	4" bore
5.00	5" bore
6.00	6" bore
7.00	7" bore
8.00	8" bore
10.00	10" bore
12.00	12" bore
14.00	14" bore
16.00	16" bore
18.00	18" bore
20.00	20" bore
24.00	24" bore
30.00	30" bore

5. Stroke

Stroke length must be in 2 decimal place format (ex. 12" = 12.00)

6. Cushions

N	Non-cushioned
B	Cushioned both ends
H	Cushioned head end
C	Cushioned cap end

7. Rod Diameter

0.63	1-5/8"
1.00	1"
1.38	1-3/8"
1.75	1-3/4"
2.00	2"
2.50	2-1/2"
3.00	3"
3.50	3-1/2"
4.00	4"
4.50	4-1/2"
5.00	5"
5.50	5-1/2"
7.00	7"
8.00	8"
9.00	9"
10.00	10"
11.00	11"
14.00	14"

8. Rod End Style

1	Male, large
1X	Male, large, extended
2	Male, small (standard)
2X	Male, small, extended
2M	Male, modified
4	Female
4M	Female, modified
5	Plain end
6	Male, full rod diameter
10	Male, for rod end coupling
M	Modified

9. Ports

N	NPTF
S	SAE
T	SAE #12, standard for 3-1/4”
M	Manifold, 4" and 5" bore cylinders
F	Flange
G	BSP/G
X	Special

10. Rod Seals

H	Urethane Ultra-Seal
N	Carboxylated lip type
P	PolyPak
F	Viton PolyPak
V	Viton lip type
J	Ultra-Seal with scraper
S	Nitrile lip type with scraper
G	Viton PolyPak with scraper
U	Viton lip type with scraper
X	Special

11. Piston Seals

N	Carboxylated lip type
D	Low friction PolyPak
P	PolyPak
R	Cast iron rings
V	Viton lip type
B	Low breakaway Teflon radial B seal with wearband
X	Special

12. Head End Port Locations

1	Port Locations 1-4
2
3
4
X	Special

13. Cap End Port Locations

1	Port Locations 1-4
2
3
4
5	Port location 5 is on the center of the back face of the end cap.
X	Special

14. Special Modifications

Include ONLY if special modifications are required

Air bleeders
Drainbacks
Special Seals
Non-standard Mounts
Oversized Ports
Bronze Bushings
Key Plate
Stop Tube

Rod Boots
Indicator Switches
Four Rod End Flats
Port or Cushion Modifications
Double-end Rod with different Rod Ends
Special Paint/Plating
Stainless Steel Rod

N5 Series Heavy Duty Tie Rod Cylinders

N5 Series Hydro-Line Industrial Tie Rod Cylinders

N5A-1.50X1.00-B-0.63-10-N-H-N-1-1

N5A-1.50X1.00-N-0.63-2-N-F-N-X-X-HA0074

N5A-1.50X1.00-N-0.63-4-S-H-N-1-1

N5A-1.50X1.50-N-0.63-2-S-H-P-1-1-HB03P2

N5A-1.50X1.75-B-1.00-2-S-V-V-1-1

N5A-1.50X2.00-N-1.00-2X-N-H-N-1-1

N5A-1.50X4.00-N-0.63-4-N-H-N-1-1

N5A-1.50X40.00-B-0.63-2-S-H-R-1-1

N5A-1.50X44.00-N-1.00-10-N-H-N-1-1

N5A-1.50X7.00-B-0.63-1-S-H-R-1-1-HB101EG

N5A-2.00X1.00-N-1.00-1-M-F-N-3-3-HA05H7