This compact 7.0” monitor with built-in, high-end Vision2 display controller provides maximum performance under extreme environmental conditions and is therefore perfectly suited for use in off-highway vehicles. The unit may either be mounted in the vehicle dashboard or through a RAM ball elsewhere in the vehicle cockpit in portrait or landscape orientation. It offers full IP 65 protection. The display is characterized by low reflection and high color saturation and provides optimal readability in any lighting conditions. Ten programmable control keys allow the creation of an easy-to use human machine interface. Up to two cameras can be connected that give the operator an optimum view around the vehicle.
System Components
Interfaces
Software
Reverse polarity protection and protection of all external interfaces (except USB) against short circuit to GND and BAT+.
Specifications
Display diagonal size | 7.0” (17.8cm) 16:9 aspect ratio |
Dimensions | 235(W) x 135(H) x 52.4(D) mm |
Weight | 1.3 kg |
Resolution | 800 (W) x 480 (H) pixel |
Active area | 152,4 (H) x 91,44 (V) mm |
LCD type | TFT (thin film transistor) active matrix |
Backlight | LED |
Backlight lifetime | 50.000 hours |
Housing | Robust housing with powder coated die-cast front |
Optical Characteristics
Luminance | 500 cd/m² |
Viewing angle | V = -60 / + 60 deg H = -70 / + 70 deg |
Contrast ratio | 600:1 |
Maximum Ratings
Operating temperature | -30 to +60°C (ambient) |
Storage temperature | -30 to +80°C |
Supply voltage | 9 to 32V |
Standards
CE-Mark | 2014/30/EU |
E- Mark | ECE-R10 |
EMC | EN 13309 |
ESD | ISO 10605 |
Electrical | ISO 16750-2 ISO 7637-3 |
Ingress Protection | ISO 20653 IP6k5 |
Climatic | ISO 16750-4 |
Mechanical | ISO 16750-3 |
7.0” Monitor w/ built-in, high-end Vision Display Controller
7.0” Monitor w/ built-in, high-end Vision Display Controller