Meter units are oil proportioning devices for cyclic systems. Each outlet of a lubricating system is controlled by a meter unit. The lubricator in the system dispenses known amounts of oil to the distribution network and meter units deliver this oil in varying amounts to the bearing points.
The first letter of the meter unit identifies the type of threads on the unit. Meter units that begin with the letter “F” denote inch threads, while those that start with the letter “A” signify metric threads.
Standard flow rates range from 00 (slow) to 3 (fast). For special situations, 3/0 (slow) and 5 (extra, extra fast) rates are available. Each incremental increase in rate size doubles the oil flow to a point.
Meter units type “F” must be used with all cyclic type lubricators (cannot be used with continuous lubricators). Meter units feed in one direction only. This is indicated by arrow stamped on body.
How to Order
Meter units have a letter and number designation stamped on the flat surface of the hexagonal body. Part numbers are listed in the tables on the following pages. When ordering, specify the complete name and part number, e.g. Meter Unit, Type FSA-0, Part #B1083.
Thread Type | Type, Location & Mating Parts | Flow Rate |
F - Inch thread - 5 lb check valve | B - 1/8 NPT male inlet thread and 1/8 BSPT male outlet thread JB - 5/16-24 male inlet thread and 5/16-24 male outlet thread for 5/32” O.D. tubing connection JC - 5/16-24 male inlet thread and 5/16-24 male outlet thread for 3/32” O.D. tubing connection JD - 1/4-28 inlet thread and 1/4-28 male outlet thread for 5/32” O.D. tubing connection KA - 1/8 NPT male thread outlet only KB - 1/8 NPT male thread inlet only KD - 1/8 BSP male thread outlet only RA - 1/8 NPT male inlet thread and 5/16-24 male outlet thread for 5/32” O.D. tubing connection RC - 1/8 NPT male inlet thread and 5/16-24 male outlet thread for 3/32” O.D. tubing connection SA - 5/16-24 male inlet thread for 5/32” O.D. tubing connection and 1/8 NPT outlet thread SB - 5/16-24 male inlet thread for 5/32” O.D. tubing connection and 1/8 BSP outlet thread T - 1/8 NPT male inlet thread and 1/8 NPT male outlet thread TA - 1/8 NPT female inlet thread(x2) and 1/8 NPT male outlet thread TB - 1/8 NPT female inlet thread(x3) and 1/8 NPT male outlet thread TC - 1/8 NPT female inlet thread(x2) and 1/8 NPT male outlet thread TD - 1/8 NPT female inlet thread(x2) and 1/8 NPT male outlet thread TG - 1/8 NPT female inlet thread(x3) and 1/8 NPT male outlet thread TH - 1/8 NPT female inlet thread(x4) and 1/8 NPT male outlet thread TK - 1/8 NPT female inlet thread(x3) and 1/8 NPT male outlet thread TL - 1/8 NPT female inlet thread(x4) and 1/8 NPT male outlet thread | 3/0 - Extra slow 00 - Slow 0 - Medium Slow 1 - Medium 2 - Medium fast 3 - Fast 4 - Extra fast 5 - Extra, extra fast |
A - Metric thread - 5 lb check valve | JB - M8x1 male inlet thread and M8x1 male outlet thread for 5/32” O.D. tubing connection JV - M8x1 male inlet thread and M8x1 male outlet thread for 5/32” O.D. tubing connection SA - M8x1 male inlet thread for 5/32” O.D. tubing connection and 1/8 BSP male outlet thread | |
M - Inch thread - 1.25 lb check valve | J - 5/16-24 male inlet thread and 5/16-24 male outlet thread for 1/8” O.D. tubing connection JC - 5/16-24 male inlet thread and 5/16-24 male outlet thread for 3/32” O.D. tubing connection |