The MultiPort Lubricator is a rugged, motor-driven, electric lubricator, equipped with fixed or adjustable output pumping elements to discharge grease or oil over a wide operating range. Low level switches are optional on this compact unit. Up to three independent feed lines can be used with the MultiPort Lubricator. A selection of timers and controller/monitors are available to program MultiPort Lubricators.
Technical Data
Reservoir Capacity | 2, 4 and 8 liter (4, 8 and 16 lb) |
Lubricant | Grease NLGI grade 2 (Max) Oil Up to 5000 SUS |
Maximum Working Pressure | Grease 3600 psi (240 bar) Oil 2900 psi (180 bar) |
Operating Voltage | As noted below |
Operating Temperature Range | Steel (6 & 12 liter), Aluminium (30 liter) |
Pumping Elements | 1 to 3 |
Output per 1 rpm | Fixed 0.16cc (0.01 cu. in.) Adjustable 0.16cc - 0.01cc (0.01- 0.0006 cu.in.) |
Motor | As noted below |
Low Level Switch | Grease N.C. (Available on some models) Oil N.O. (Available on some models) |
Discharge Element Output Port | 1/4" NPTF 1/4" BSPP (230vac single phase only) |
Fill Connection | Grease Male filler fitting, quick disconnect plug Oil Fill cap |
Motor
IP Enclosure Rating | HP Rating | Voltage | Amperage |
IP-55 | 0.068 | 12 VDC1 | 4 FLA |
24 VDC1 | 2 FLA | ||
0.08 | 110 VAC2 | 1.83 FLA | |
220 VAC2 | 0.68 FLA | ||
220/380/440 VAC2 | 0.63 FLA |
1 Operates at 40 rpm @ 68˚F, 1000 psi back pressure
2 Operates at 32 rpm (60 Hz) @ 68˚F, 1000 psi back pressure