Direct Drive Mechanical Pump Model TP2

TP Pumps are used on central pumping stations with T30 or T32 reservoirs, or in bulk oil installations without reservoirs. They are actuated by air or hydraulic power. The pumps meet a wide range of requirements. The discharge capacities range from 0.015 to 0.170 cubic inches per stroke. These pumps offer a range of pressure ratios, and are available as single acting, spring return or double acting, power return.

TP2 Pump

Technical Data

Pump Part Number	Discharge Cu. In.		Method of Pump Operation	Pump Return Action	Pressure Ratio at Suggested Minimum Operating Pressure	Maximum Operating Pressure	Maximum Cycles Per Min.
							At Max. Disch. Adjustment		At 50% Max. Disch. Adjustment
	Minimum	Maximum					NLGI #1	NLGI #2	NLGI #1	NLGI #2
TP2C2	0	.095 (1.6cc)	Cam	Spring	11 Times Operating Force	As required	60	30	75	37

The components - pumps, reservoir, and pressure regulator - must be ordered separately. They are not sold as complete stations.

Shop Product Catalog

Filters

Sort by

Display items per page