NRC Noise Reduction Clamp

Noise Reduction Clamp

• Designed for the noise and vibration reducing installation of pipes and tubes
• Suitable for the most common outside diameters from 6 to 42 mm and from ¼ to 1-½ inch respectively
• Working principle based on a specially shaped, two-part elastomer insert, which mechanically absorbs vibration in the pipe or tube and as a result reduces noises arising to a minimum
• Elastomer insert is in particular distinguished by how little of its surface is in contact with the pipe or tube as well as with the clamp body
• Light tension of the elastomer insert in mounted condition provides the necessary clamping force
• Tongue-groove contour of the elastomer insert and the clamp body (which is reversed and thus diverges from standard DIN 3015 clamps with elastomer insert) enables the system to be used for the maximum range of outside diameters per clamp size, which contributes to flexibility, versatility and optimization of the required installation space

Ordering Codes

 

NRC Clamp Assembly
212-PP-NRC

One assembly is consisting of one clamp body and one insert.

STAUFF Group	2
Exact outside diameter (mm)	12
Material code	PP-NRC

Standard Materials

 

	Polypropylene Material Code: PP-NRC
	Polyamide Material Code: PA-NRC
	Elastomer Insert Thermoplastic Elastomer (73 Shore-A) Material Code: RI-NRC