Sensor-PPC-CAN-T Temperature Sensors

The CAN Temperature Sensor-PPC-CAN-T are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. The Sensor-PPC-CAN-T is compatible with the CAN Flow Turbine Flow-meter-PPC-CANSFM and the Straight Threaded Joint SGV-16S-G-W3. Most technical details are the same as with the Temperature Sensor-PPC-04/12-T.

Due their sturdy Stainless Steel design with automatic sensor recognition, the CAN Temperature Sensor is a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED. Connecting the CAN Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.

Technical Data

• Suitable for liquids
• 5-pin SPEEDCON connection plug
• Sensor identification LED

Materials

• Housing (T): Stainless Steel
• Gaskets (T): FKM (Viton®)

Weight

• M02 (M10x1): 70 g (.15 lbs)
• B04 (G1/4): 55 g (.12 lbs)

Ambient Conditions (Screw-in Temperature Sensor)

• Media temperature: -40°C to+150°C (-40°F to +302°F)
• Ambient temperature: -40°C to +85°C (-40°F to +185°F)
• Storage temperature: -40°C to +85°C (-40°F to +185°F)

Ambient Conditions (Rod-type Temperature Sensor)

• Media temperature: -25°C to +125°C (-13°F to +257°F)
• Ambient temperature: -25°C to +70°C (-13°F to +158°F)
• Storage temperature: -25°C to +80°C (-13°F to +176°F)

Measuring Range

• Measuring range: -40°C to +150°C (-40°F to +302°F)
• Operating pressure: 630 bar (9137 PSI)
• Maximum pressure: 800 bar (11603 PSI)
• Burst pressure: 2150 bar (31183 PSI)
• Accuracy: ±0,66 % FS

CANopen Interface

• CANopen protocol profile DS301, Typ 2.0A with manufacturer-specific additions
• LSS service DS305 v2.0

Electrical Data

• Output signal: CAN bus
• Response time
  M02 (M10x1): T50 ≤ 4 s, T90 ≤ 12 s
  B04 (G1/4): T50 ≤ 4 s, T90 ≤ 14 s
• Vibration loading: acc. to IEC 60068-2-6 (20 g)
• Shock loading: acc. to IEC 60068-2-27 (50 g)