KHDG5V5 Proportional Two-Stage Directional Valves Servo Performance with Double Spool Feedback KHDG5V-5/7/8
Eaton KHDG proportional valves are suitable for working pressures up to 350 bar (5000 psi) and flow rates to 720 l/min (190 USgpm). They are designed to provide a controlled oil flow in proportion to a command signal, with spool position feedback to provide accurate control. Zero lapped spools are available for closed loop control applications and hydrostats are available for load compensation.
Features and benefits Factory-sealed adjustments increase valve-to valve reproducibility. Valve with integrated amplifier selected, ordered, delivered and installed as one performance tested package. Vibration and shock tested. Standard 24V DC supply with wide tolerance band. Wide range of spool and flow rate options. Standard ± 10V DC and 4-20mA command signals. Installation wiring reduced and simplified. Standard 7-pin connector. Simple valve removal and replacement for service. Supported by auxiliary function modules. IP65 and IP67 environmental protection rating. Optional valve enable function. Optional pilot pressure reducer. Sort by Position Name: A to Z Name: Z to A Price: Low to High Price: High to Low Created on Display 12 24 48 per page
P/N# 871918 KHDG5V-5 Servo Performance Two-Stage Proportional Valve with Dual Spool Feedback without On-board Electronics
P/N# 871920 KHDG5V-5 Servo Performance Two-Stage Proportional Valve with Dual Spool Feedback without On-board Electronics
P/N# 02-319215 KHDG5V-5 Servo Performance Two-Stage Proportional Valve with Dual Spool Feedback without On-board Electronics