Features & Benefits
- Low Profile Z-Frame
- Easily fits under machinery
- Lower cost and sleeker than 3200 LPZ and other options on the market
- Cleated and flat belt options available
- Fixed angle modules
- Horizontal to incline, nose-over and Z-frame configurations
Z-Frame Flat Belt End Drive Specifications
- Loads up to 80 lbs (36 kg)
- Belt speeds up to 250 ft/min (76 m/min)
- Belt widths: 1.75″ (44 mm) to 24″ (610 mm)
- Conveyor lengths: 24″ (610 mm) to 18′ (5,486 mm)
- Fixed angle: 5˚, 10˚, 15˚, and 20˚
- 1.25″ (32 mm) diameter drive and idler pulleys turn approximately 4.2″ (107 mm) of belt per revolution
- V-groove bedplate with guided belt provides positive belt tracking, even under demanding side load applications
- Configurations:
Z-Frame Cleated Belt End Drive Specifications
- Loads up to 50 lbs (23 kg)
- Belt speeds up to 250 ft/min (76 m/min)
- Belt widths: 6″ (44 mm) to 24″ (610 mm)
- Conveyor lengths: 24″ (610 mm) to 18′ (5,486 mm)
- Fixed angle: 30˚, 45˚, and 60˚
- Cleats available from 0.24″ (6 mm) to 2.36″ (60 mm) high
- 1.25″ (32 mm) diameter drive and idler pulleys turn approximately 4.2″ (107 mm) of belt per revolution
- V-groove bedplate with guided belt provides positive belt tracking, even under demanding side load applications
- Configurations
- Horizontal to incline
- Noseover
- Z-frame