M10 Series |
Product Series | M10 - 10,000 Series Motor |
Displacement | 406 - 665.3 cm3/r [40.60 in3/r] |
Mounting Type | AA - standard, 4 bolt, 127.0 [5.00] pilot dia. 16.76 [.660] dia. holes on 161.92 [6.375] dia. bolt circle. |
Output Shaft | 03 - 53.98 [2.125] dia. flat root,major dia. fit,16 tooth, 8/16 dp, 30 degree involute spline with .500-20 unf-2b thread in end. 52.07 [2.050] minimum full spline length |
Port Type | AA - 1.3125-12 un-2b sae o-ring staggered ports |
Case Flow Options | 01 - .5625-18 UNF-2B CASE DRAIN SAE O-RING PORT |
Low Pressure Relief | 0 - NONE |
Pressure/Flow Option | 00 - NONE |
Geroler Options | 0 - STANDARD |
Seal Options | 0 - standard |
Accessories | 00 - none |
Special Features (Hardware) | 00 - NONE |
Special Features (Assembly) | 00 - none |
Design Code | C - THIRD |